Click the link to read the article on the Steamboat Pilot & Today website (Elainna Hemming). Here’s an excerpt:
June 9, 2026
At the Yampa Town Board meeting last week, Andi Schaffner with the Bear River Reservoir Company presented plans and cost estimates for a Stillwater Reservoir project that would lead to removal of its storage restriction. The plan consists of two phases involving installation of a strain and a sand filter to alleviate seepage into the dam’s embankment, the primary concern that led to the storage restriction designation…Currently, the town of Yampa owns 112 shares in Stillwater Reservoir, or about 2% of the reservoir. Phase 1 of the project consists of a blanket drain and filter collar and is estimated to cost $730,717. Phase Two of the project will be stabilizing the channel and the removal of the culvert and the flume, at a total estimated cost $209,874. Schaffner said that the team at Bear River Reservoir Company has spent hours on engineering and studies at the reservoir in order to determine the best solution for the dam. “We finally opted for the least expensive fix, which is what we’re working on right now,” said Schaffner…The project has received a significant amount of grant funding despite higher than anticipated bids, including a $202,000 loan from the Colorado Water Conservation Board. This loan was the primary expected cost for the town of Yampa, and is expected to be approved with an increase to $404,000 ahead of the project’s notice to proceed with the contractor on July 13. The project is expected to be completed by the end of October. The Colorado Water Conservation Board loan is 30 years with 1.85% interest, or $3.40 per share per year. For the town of Yampa’s 100 or so shares, this amounts to $381 a year. Schaffner did not expect any more expenses besides an assessment of the shares which amounts to about $5.